Order Products : sales@su-jiao.com
Wondel® P PG4
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Nanjing Julong Engineering Plastics Co., LTD |
| Trademark: | Wondel® P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G2kwgO_Wondel-P-PG4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Wondel® P PG4 is a Polypropylene material filled with 20% glass fiber. It is available in Asia Pacific. Primary attribute of Wondel® P PG4: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.60 to 0.90 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 102 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 70.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 5.0 | % | ISO 527-2 |
| Flexural Stress | 95.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 10 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 140 | °C | ISO 75-2/B |
| Melting Temperature (DSC) | 167 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIREX® 3020U(E) | Samyang Corporation | PC | TRIREX® |
| Witcom PA66 8LC-HS | Witcom Engineering Plastics B.V. | Nylon 66 | Witcom PA66 |
| BLUESTAR® PBT 101G20 | Nantong Zhonglan Engineering Plastics Co., Ltd. | PBT | BLUESTAR® |
| ISOLOSS® LS-2500 | E-A-R Specialty Composites | PUR, Unspecified | ISOLOSS® |
| Plenco 04466 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
