Order Products : sales@su-jiao.com
Indothene HD HD53MA020
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene HD |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G2cdxa_Indothene-HD-HD53MA020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Indothene-HD HD53MA020 is a low MI High Density Polyethylene grade produced using the process know-how of M/s. BP Chemicals. This grade is specially designed and recommended for manufacture of technical moulding articles such as Caps and closures for various applications. It has a very narrow molecular weight distribution, which makes it very much suitable for Injection Moulding and products manufactured have very good gloss, impact strength and rigidity. FOOD CONTACT APPLICATIONS : This grade shall meet the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It shall also conform to the positive list of constituents as approved in IS:10141:1982. The grade & additive used shall comply with FDA regulation : CFR title 21 , 177.1520, Olefin polymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 26.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.20 mm, Injection Molded) | 800 | % | ASTM D638 |
| Flexural Modulus 3(3.20 mm, Injection Molded) | 1000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm, Injection Molded) | 300 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 121 | °C | ASTM D1525 |
| Peak Crystallization Temperature (DSC) | 130 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 280 | °C | |
| Middle Temperature | 180 to 280 | °C | |
| Front Temperature | 180 to 280 | °C | |
| Nozzle Temperature | 200 to 280 | °C | |
| Mold Temperature | 40.0 to 70.0 | °C | |
| Injection Pressure | 58.8 to 98.1 | MPa |
| Note Message | |
|---|---|
| 1 . | Type I |
| 2 . | Type I |
| 3 . | Type I |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tool-A-Thane UT-25 | Urethane Tooling & Engineering Corp | PUR, Unspecified | Tool-A-Thane |
| Celstran® PA66-GF40-02P11 | Celanese Corporation | Nylon 66 | Celstran® |
| Flontech® FT-1-8 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Hylex® P1017 L2 HB | Entec Polymers | PC | Hylex® |
| Plenco 02000 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
