Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroplastic FEP 6307Z
| Category: | FEP , Perfluoroethylene Propylene Copolymer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroplastic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fx15Qk_3M-Dyneon-Fluoroplastic-FEP-6307Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Features Dyneon™ FEP 6307 Z Fluorothermoplastic was developed for extrusion and injection molding for the wire and cable and chemical process industry. General properties of this FEP grade are shown below:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.15 | g/cm³ | ISO 12086 |
| Melt Mass-Flow Rate (MFR) (372°C/5.0 kg) | 7.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 25.0 | MPa | ISO 527-1 |
| Tensile Strain (Break, 23°C) | 350 | % | ISO 527-1 |
| Flexural Modulus (23°C) | 580 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-40°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 257 | °C | ISO 12086 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (0.250 mm) | 63 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | 2.05 | ||
| 23°C, 9.40 GHz | 2.05 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 MHz | < 7.0E-4 | ||
| 9.40 GHz | 3.0E-4 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | > 95 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD 281 | RTP Company | Nylon 66 | RTP |
| TAIRILAC AG22AT | Formosa Plastics Corporation | ABS | TAIRILAC |
| ACRYLITE® Heatresist hw55 | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® |
| Bapolene® LD100F | Bamberger Polymers, Inc. | LDPE | Bapolene® |
| PENTAMID B MK40 H schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
