Order Products : sales@su-jiao.com
RTP 6042-70A MD
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FrlrHW_RTP-6042-70A-MD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ISO 10993 Tested |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.0 - 2.0 | % | ASTM D955 |
| Moisture Content | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain, 3.18mm 1 | 2.28 | MPa | ASTM D412 |
| 100% strain, 3.18mm 2 | 2.90 | MPa | ASTM D412 |
| 300% strain, 3.18mm 3 | 5.38 | MPa | ASTM D412 |
| Tensile Strength 4(Break, 3.20 mm) | 13.8 | MPa | ASTM D412 |
| Tensile Elongation 5(Break) | 500 | % | ASTM D412 |
| Tear Strength 6 | 46.4 | kN/m | ASTM D624 |
| Compression Set 7 | ASTM D395B | ||
| 23°C, 22 hr | 25 | % | ASTM D395B |
| 70°C, 22 hr | 80 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 193 - 238 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mold, 510mm/min |
| 2 . | Mouth die C, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | C mold, 500 mm/min |
| 5 . | Mouth die C, 500 mm/min |
| 6 . | C mould |
| 7 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| EZPrene 9045A | ENPLAST Americas, a Ravago Group Company | TPV | EZPrene |
| PLASTRON™ PA66-CF40-02 | Daicel Polymer Ltd. | Nylon 66 | PLASTRON™ |
| Polifil® PP T-40 | The Plastics Group | PP Homopolymer | Polifil® PP |
| POLYAXIS® PD 2000 | A. Schulman Inc. | PP Copolymer | POLYAXIS® |
| POLYFORT® FPP 10 GFC | A. Schulman Europe | PP Homopolymer | POLYFORT® |
