Order Products : sales@su-jiao.com
EMERGE™ PC/ABS 7580
| Category: | PC+ABS , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fra2pu_EMERGE-PC-ABS-7580.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EMERGE PC/ABS 7580 is an ignition resistant PC/ABS blend that contains no chlorine or bromine additives. It has UL94 flammability rating of 1.5mm V-0. It fits into applications that require high heat distortion temperature. It is easy processing and high heat properties make it ideal for optimizing productivity in injection molding. Major applications include: Power adaptor & charger, Laser printer & MFP, Copiers, LAN/WLAN facilities and Electrical & Electronic components. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 230°C/3.8 kg | 15 | g/10 min | |
| 260°C/5.0 kg | 50 | g/10 min | |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 65.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 95 | % | ASTM D638 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Flexural Strength | 98.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 730 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.20 mm, Injection Molded | 105 | °C | |
| 1.8 MPa, Unannealed, 3.20 mm, Injection Molded | 96.0 | °C | |
| Vicat Softening Temperature | 116 | °C | ASTM D1525 |
| Ball Indentation Temperature 1 | 105 | °C | IEC 60335-1 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 2(1.50 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 220 to 250 | °C | |
| Middle Temperature | 235 to 260 | °C | |
| Front Temperature | 240 to 270 | °C | |
| Nozzle Temperature | 240 to 270 | °C | |
| Mold Temperature | 60.0 to 90.0 | °C |
| Note Message | |
|---|---|
| 1 . | 2 mm |
| 2 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 283 TFE 10 | RTP Company | Nylon 66 | RTP |
| RX® 3-2-520F-P | Sumitomo Bakelite North America, Inc. | DAP | RX® |
| Spartech Polycom SC7A21-2800 | Spartech Polycom | PC+PBT | Spartech |
| NHU-PPS 21610C/F | Zhejiang NHU Comp. Ltd. | PPS | NHU-PPS |
| NYLOY® AT-0060N | Nytex Composites Co., Ltd. | PS (GPPS) | NYLOY® |
