Order Products : sales@su-jiao.com
EverGlide® SG1908
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Polymer Dynamix |
| Trademark: | EverGlide® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fplypb_EverGlide-SG1908.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RSi PA6 Compound Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 51.0 | MPa | ASTM D638 |
| Fracture | 37.9 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 8.0 | % | ASTM D638 |
| Fracture | 40 - 50 | % | ASTM D638 |
| Flexural Modulus | 1520 | MPa | ASTM D790 |
| Flexural Strength | 56.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 64 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.12 | % | |
| Rear Temperature | 232 - 260 | °C | |
| Middle Temperature | 238 - 266 | °C | |
| Front Temperature | 243 - 271 | °C | |
| Nozzle Temperature | 249 - 277 | °C | |
| Processing (Melt) Temp | 249 - 277 | °C | |
| Mold Temperature | 65.6 - 93.3 | °C | |
| Injection Pressure | 34.5 - 138 | MPa | |
| Injection Rate | Moderate | ||
| Screw Speed | 40 - 70 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 232 - 260 | °C | |
| Cylinder Zone 3 Temp. | 238 - 266 | °C | |
| Cylinder Zone 5 Temp. | 243 - 271 | °C | |
| Melt Temperature | 249 - 277 | °C | |
| Die Temperature | 249 - 277 | °C |
| Extrusion instructions |
|---|
| Suggested Max Moisture: .12% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadraflex™ ALE-55D | Biomerics, LLC | TPU-Polyether | Quadraflex™ |
| SLOVASTER® B1 GF 10 MI | Plastcom | PBT | SLOVASTER® |
| Vydyne® R633H01 | Ascend Performance Materials Operations LLC | Nylon 66/6 | Vydyne® |
| LNP™ STAT-KON™ DD0009E compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
| PLUSTEK RA601 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
