Order Products : sales@su-jiao.com
Sofprene T® 550100A45
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Sofprene T® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FoGhnC_Sofprene-T-550100A45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sofprene T® 550100A45 is a Styrene Butadiene Styrene Block Copolymer (SBS) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Sofprene T® 550100A45: REACH Compliant. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 6 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 0.800 | MPa | ASTM D412 |
| Tensile Strength 2 | 1.50 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 520 | % | ASTM D412 |
| Tear Strength 4 | 12.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 | °C | |
| Middle Temperature | 160 | °C | |
| Front Temperature | 170 | °C | |
| Nozzle Temperature | 175 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 203 TFE 13 SI 2 | RTP Company | Nylon 66 | RTP |
| REXtac® APAO RT 4460 | Huntsman Corporation | PAO | REXtac® APAO |
| Durethan® BC 700 HTS DUSXBL 900116 | LANXESS GmbH | Nylon 6 | Durethan® |
| LNP™ KONDUIT™ PX11311U compound | SABIC Innovative Plastics Europe | Nylon 6 | LNP™ KONDUIT™ |
| ULTEM™ 2300R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
