Order Products : sales@su-jiao.com
Asaprene™ T-437
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Asaprene™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FnlUR7_Asaprene-T-437.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Specifically developed for superior characteristics and performance in asphalt blends. It is supplied in crumb form. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 2.0 | g/10 min | ISO 1133 |
| Styrene/Butadiene | 30/70 | % | Internal Method |
| Viscosity - 25% solution in toluene | 1.70 | Pa·s | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 23°C, 2.00 mm, Compression Molded) | 75 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain, 23°C, 2.00 mm) | 2.30 | MPa | ISO 37 |
| Tensile Stress 2(Break, 23°C, 2.00 mm) | 31.0 | MPa | ISO 37 |
| Tensile Elongation 3(Break, 23°C, 2.00 mm) | 890 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Type 1A |
| 2 . | Type 1A |
| 3 . | Type 1A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon® EME-6710SJ | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| Varcum 29008 | Durez Corporation | Phenolic | Varcum |
| Next Nylon 6 Prime Series NM40-01BK | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| Grilon® TSS/4 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| POLYCASA® PETG UV | Polycasa | PETG | POLYCASA® |
