Order Products : sales@su-jiao.com
Lustran® ABS 261
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | INEOS ABS (USA) |
| Trademark: | Lustran® ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fkt7ow_Lustran-ABS-261.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lustran ABS 261 resin is a natural, stiffer-flow, virgin blending grade of ABS (acrylonitrile butadiene styrene). It is designed for use with other high-impact ABS resins for drain, waste, and vent (DWV) pipe and fittings. Lustran ABS 261 resin in natural color (000000) meets or exceeds ASTM D 3965 2-1-2-2-2 cell class requirements, and is listed under NSF Standard 14. Lustran ABS 261 resin is also listed under CSA Standard B181.1. As with any product, use of Lustran ABS 261 resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 220°C/10.0 kg | 6.0 | g/10 min | ASTM D1238 |
| 230°C/10.0 kg | 11 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 37.2 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.18 mm | 110 | J/m | ASTM D256 |
| 23°C, 3.18 mm | 260 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 6.35 mm) | 101 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Suggested Max Regrind | 40 | % | |
| Processing (Melt) Temp | 232 - 243 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C | |
| Injection Rate | Moderate-Fast |
| Injection instructions |
|---|
| Injection Pressure: Moderately High to HighCushion: Minimum |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Melt Temperature | 232 - 243 | °C |
| Extrusion instructions |
|---|
| Compression Ratio: 2.4:1.0 to 2.8:1.0L/D Ratio: 24.0: to 36.0:1.0Max Regrind Allowed: 40% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MELOPAS® MF 152.7 | RASCHIG GmbH | Mel Formald | MELOPAS® |
| RIALBATCH H 02 SD 70 B | RIALTI Srl | PP Homopolymer | RIALBATCH |
| Baytec® U1281XA | Covestro - PUR | TSU | Baytec® |
| DOWLEX™ 2049P | The Dow Chemical Company | LLDPE | DOWLEX™ |
| Geon™ Vinyl Flexible XV3765 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
