Order Products : sales@su-jiao.com
Starflex GM1510BA
| Category: | mLLDPE , Metallocene Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Starflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FhklGU_Starflex-GM1510BA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Starflex GM1510BA is a pelletized mLLDPE resin for use in applications that require maximum strength and toughness. GM1210BA contains a processing aid but does not contain slip or antiblock. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 19 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 19 µm | 172 | MPa | ASTM D882 |
| 1% secant, TD : 19 µm | 186 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 19 µm | 66.9 | MPa | ASTM D882 |
| TD : Break, 19 µm | 59.3 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 19 µm | 470 | % | ASTM D882 |
| TD : Break, 19 µm | 570 | % | ASTM D882 |
| Dart Drop Impact 1(19 µm) | 1200 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 19 µm | 150 | g | ASTM D1922 |
| TD : 19 µm | 240 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 19.1 µm) | 50 | ASTM D2457 | |
| Haze (19.1 µm) | 12 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 204 - 232 | °C |
| Extrusion instructions |
|---|
| Blow-up ratio: 1.5 to 3 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex NT0110GN | Ginar Technology Co., LTD. | Nylon 6 | Mapex |
| Tecomid® NB40 GR15 NL XA70 | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| Ultramid® A3EG7 BK23189 | BASF Corporation | Nylon 66 | Ultramid® |
| Adell Polyamide AR-38 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| HiFill® PA4/6 M/GF20 HS | Techmer Engineered Solutions | Nylon 46 | HiFill® |
