Order Products : sales@su-jiao.com
Zhongfa PP pp5
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Yuyao Zhongfa Engineering Plastics Co. Ltd. |
| Trademark: | Zhongfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fdz3SA_Zhongfa-PP-pp5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zhongfa PP pp5 is a polypropylene material,. This product is available in the Asia-Pacific region and is processed by injection molding. The main features of Zhongfa PP pp5 are:
The typical application field of Zhongfa PP pp5 is: automotive industry |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.8 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 47 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 23.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 300 | % | ASTM D638 |
| Flexural Modulus | 700 | MPa | ASTM D790 |
| Flexural Strength | 25.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Additional Information |
|---|
| Aging Resistance at 150°C: >500 hrNotched Izod Impact, ASTM D256: 30 kJ/m²Unnotched Izod Impact, ASTM D256: No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 - 95.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Processing (Melt) Temp | 195 - 225 | °C | |
| Mold Temperature | 45.0 - 80.0 | °C | |
| Injection Pressure | 60.0 - 90.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ShinkoLite-P MD | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| Next Nylon 6 Industrial Series NG15-02BK | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Industrial Series |
| 4MID® 9AB22130 HUV | 4Plas | Nylon 66/6 | 4MID® |
| Di-Pak™ E-4889 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| DURACON® SW-01LV | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
