Order Products : sales@su-jiao.com
Indothene 1035FS20
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FdKYTO_Indothene-1035FS20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Indothene 1035FS20 is a Low Density Polyethylene product. It is available in Africa & Middle East, Asia Pacific, or Europe. Typical application: Film. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | 0.15 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break | 18.6 | MPa | |
| TD : Break | 16.7 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 250 | % | |
| TD : Break | 400 | % | |
| Dart Drop Impact | 90 | g | ASTM D1709 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADMER™ NF642E | Mitsui Chemicals Europe GmbH | LLDPE | ADMER™ |
| GAPEX® RPP20EU61BK | Ferro Corporation | PP, Unspecified | GAPEX® |
| Latimass 47/7-04 D008 | LATI S.p.A. | PP Copolymer | Latimass |
| WELLAMID Nylon 6600-PA66-GV 20 HWV0CP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| SCHULAMID® 66 GF 33 FC | A. Schulman Europe | Nylon 66 | SCHULAMID® |
