Epoxies, Ect. 60-7155

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Epoxies, Etc.
Trademark:	Epoxies, Ect.
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FbGQ5d_Epoxies-Ect-60-7155.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
UV Cure 60-7155 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7155 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant. UV Cure 60-7155 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to "dark cure." Once exposed to UV light the UV Cure 60-7155 will continue to cure in the absence of light. This is advantageous when potting or joining substrates with shadow areas. UV Cure 60-7155 may also be heat cured as a secondary cure operation. UV Cure 60-7155 is not affected by oxygen and will not have a sticky or greasy surface. The surface is rigid, smooth, and glossy when properly cured. UV Cure 7155 bonds to metal, plastic, aper and ceramic. UV Cure 60-7170 is a higher viscosity version of UV Cure 60-7155. Features: One component Excellent adhesion Contains no solvents Good electrical insulation Low shrinkage No out gassing Will shadow cure Good weathering resistance Cure is not inhibited by oxygen Low odor

Message

UV Cure 60-7155 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7155 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant.

UV Cure 60-7155 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to "dark cure." Once exposed to UV light the UV Cure 60-7155 will continue to cure in the absence of light. This is advantageous when potting or joining substrates with shadow areas. UV Cure 60-7155 may also be heat cured as a secondary cure operation.

UV Cure 60-7155 is not affected by oxygen and will not have a sticky or greasy surface. The surface is rigid, smooth, and glossy when properly cured. UV Cure 7155 bonds to metal, plastic, aper and ceramic.

UV Cure 60-7170 is a higher viscosity version of UV Cure 60-7155.

Features:

One component

Excellent adhesion

Contains no solvents

Good electrical insulation

Low shrinkage

No out gassing

Will shadow cure

Good weathering resistance

Cure is not inhibited by oxygen

Low odor

General Information
Features	Bondability Electrically Insulating Good Adhesion Good Chemical Resistance Good Weather Resistance High Clarity Low Shrinkage Low to No Odor Low to No Water Absorption Medium Gloss Semi Rigid
Uses	Adhesives Bonding
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Additional Information	Nominal Value	Unit
Operating Temperature	-50.0 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Solids Content	100	%
Density (25°C)	1.09	g/cm³
Viscosity (25°C)	1.0	Pa·s
Shelf Life (40°C)	> 1	month

Cured Properties	Nominal Value	Unit
Tensile Strength	42.7	MPa
Electric Strength	17	kV/mm

Resin Grade	Manufacturer	Category	Trademark
3M™ Dyneon™ PTFE Compound TF 3105	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound
ADDINYL A2H M30	ADDIPLAST	Nylon 66	ADDINYL
APICAL 150AF019	Kaneka Corporation	Film, PI	APICAL
Crastin® LW9020FR NC010	DuPont Performance Polymers	PBT	Crastin®
SQUARE® SSR2026-50A/B	Shenzhen SQUARE Silicone Co., Ltd.	Silicone	SQUARE®