Order Products : sales@su-jiao.com

NuSil EPM-2463

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Fb5RCK_NuSil-EPM-2463.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs) Comments: 1.5 W/m-K, remains conductive over broad operating temperature range

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Thermal Interface Materials (TIMs)

Comments: 1.5 W/m-K, remains conductive over broad operating temperature range

General Information
Features	Electrically Conductive Good Corrosion Resistance Good Thermal Stability Low Moisture Absorption Low Shrinkage
Uses	Electrical/Electronic Applications

Physical	Nominal Value	Unit
Spiral Flow	10.2	cm

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity	1.5	W/m/K	ASTM C177

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.50

Additional Information	Nominal Value	Unit
Cure System	Tin
Ionic Content
Cl	< 5	ppm
K	< 10	ppm
Na	< 5	ppm
Operating Temperature	-115 to 260	°C

Uncured Properties	Nominal Value	Unit
Color	Green Grey
Density	3.29	g/cm³
Curing Time (23°C)	1.7E+2	hr
Pot Life	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	80
Lap Shear Strength ¹	1.21	MPa
Tensile Strength	2.07	MPa
Tensile Elongation at Break	75	%
Tear Strength	9.63	kN/m

Note Message
1 .	Primed with SP-120

Resin Grade	Manufacturer	Category	Trademark
Starflam PF0023E	Eurostar Engineering Plastics	Nylon 6	Starflam
TES J-1200/10 BK2089	Techmer Engineered Solutions	ABS	TES
Dynaflex™ G7960-9 NSFG	PolyOne Corporation	TPE	Dynaflex™
Geon™ Vinyl Rigid Extrusion 87262	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
GELOY™ XTPMFR10 resin	SABIC Innovative Plastics Asia Pacific	ASA+PC	GELOY™