Order Products : sales@su-jiao.com

Tuftec™ P2000

Category:	SBBS , Styrene Butadiene Butylene Styrene Copolymer
Manufacturer:	AKelastomers
Trademark:	Tuftec™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FZ7yvK_Tuftec-P2000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
In common with all grades in the Tuftec™ P series, Tuftec™ P2000 is a new polymer type, termed SBBS, produced by selective hydrogenation at appropriate locations on the molecular chains of styrenic thermoplastic elastomers (styrene/butadiene/styrene; SBS). As a result, it is inherently outstanding in thermal properties, and superior in processability and low-temperature properties to the structurally similar Tuftec™ H series of SEBS polymers. Tuftec™ P2000 is high in styrene content, and particularly effective as a modifier for styrenic, polyphenylene ether (PPE), and other polymers, and as a compatibilizer for styrenic and olefinic polymers. It is supplied in pellet form. Applications: Primarily for compatibilization between styrenic and olefinic polymers. Properties highly advantageous for food container applications.

Message

In common with all grades in the Tuftec™ P series, Tuftec™ P2000 is a new polymer type, termed SBBS, produced by selective hydrogenation at appropriate locations on the molecular chains of styrenic thermoplastic elastomers (styrene/butadiene/styrene; SBS). As a result, it is inherently outstanding in thermal properties, and superior in processability and low-temperature properties to the structurally similar Tuftec™ H series of SEBS polymers. Tuftec™ P2000 is high in styrene content, and particularly effective as a modifier for styrenic, polyphenylene ether (PPE), and other polymers, and as a compatibilizer for styrenic and olefinic polymers. It is supplied in pellet form.

Applications:
Primarily for compatibilization between styrenic and olefinic polymers. Properties highly advantageous for food container applications.

General Information
Features	Good Processability
Uses	Food Containers Low Temperature Applications
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.980	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	74		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Break)	24.5	MPa	ISO 37
Tensile Elongation ²(Break)	42	%	ISO 37

Note Message
1 .	Type 1A, 500 mm/min
2 .	Type 1A, 500 mm/min

Resin Grade	Manufacturer	Category	Trademark
RJM SL701M6T	RJM International, Inc.	PP, Unspecified	RJM
TEKNIFLEX® VA12300	Tekni-Films, a div of Tekni-Plex	Film, PVC/PCTFE	TEKNIFLEX®
VALOX™ DR48 resin	SABIC Innovative Plastics	PBT	VALOX™
APEX® 92-G2370A-75	Teknor Apex Company	PVC, Flexible	APEX®
Hostacom TYC727N	LyondellBasell Industries	TPO (POE)	Hostacom