Order Products : sales@su-jiao.com
Network Polymers LDPE 10 2523
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Network Polymers LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FWEIfy_Network-Polymers-LDPE-10-2523.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Network Polymers LDPE 10 2523 is a Low Density Polyethylene product. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) 1(190°C/2.16 kg) | 24 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Flexural Modulus 2 | 303 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -35.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Method I (3 point load), 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Primefin E535/30GC | Lucent Polymers, Inc. | PP, Unspecified | Primefin |
| UNISOFT TPE™ ST-35A-NT-2-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| ADDINYL A2 X | ADDIPLAST | Nylon 66 | ADDINYL |
| Biffa r-PP Black Hi Melt | Biffa Polymers Ltd | PP, Unspecified | Biffa |
| KEBAFLEX® SG 25 A.1 | BARLOG plastics GmbH | TES | KEBAFLEX® |
