Order Products : sales@su-jiao.com
TECOLITE KM-13N(G)
| Category: | Phenolic , Phenolic |
| Manufacturer: | KYOCERA Chemical Corporation |
| Trademark: | TECOLITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FVGdlg_TECOLITE-KM-13N-G-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Excellent insulation, Excellent mechanical strength and Excellent moldability. Satisfied the demanded properties. Kyocera Chemical's phenolic molding compounds "TECOLITE" have a long years results for use in heavy electrical parts. "TECOLITE" have the outstanding properties. Especially excellent insulation properties and also excellent intensity and good moldability. "TECOLITE" are best for the terminal parts, high-class switch parts, and telecommunication parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | |
| Molding Shrinkage | |||
| Flow 1 | 1.4 to 1.6 | % | |
| Flow 2 | 0.60 to 0.70 | % | |
| Across Flow 3 | 1.1 to 1.3 | % | |
| Water Absorption (Equilibrium) | < 0.20 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 88.0 to 118 | MPa | |
| Compressive Strength | 196 to 245 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 160 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | |||
| After Boiling | 1.0E+10 to 1.0E+11 | ohms | |
| As Molded | 1.0E+11 to 1.0E+12 | ohms | |
| Dielectric Strength | > 11 | kV/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.710 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| 2 . | Compression Molding |
| 3 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vatpol 305 | Vatan Plastik San. Tic. AS | PE, Unspecified | Vatpol |
| Niuk 70GP30 | Shanghai Niuk New Plastic Technology Co., Ltd. | AS | Niuk |
| HiFill® PBT GF20 | Techmer Engineered Solutions | PBT | HiFill® |
| OmniPro™ CPP GRC50 | OMNI Plastics, LLC | PP Copolymer | OmniPro™ |
| PEEK-OPTIMA® Image Contrast (Low radiopacity) | Invibio Inc. | PEEK | PEEK-OPTIMA® |
