Order Products : sales@su-jiao.com
Polifil® Nylon 620
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FVCycQ_Polifil-Nylon-620.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polifil® Nylon 620 is a Polyamide 66 (Nylon 66) product. It is available in North America. Typical application: Housings. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.015 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.5 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 117 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 75.8 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 4.0 | % | |
| Break | 30 | % | |
| Flexural Modulus | 2620 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 202 | °C | |
| 1.8 MPa, Unannealed | 87.2 | °C | |
| Melting Temperature | 254 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 3.90 | ASTM D150 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 282 | °C | |
| Middle Temperature | 274 | °C | |
| Front Temperature | 271 | °C | |
| Nozzle Temperature | 260 to 299 | °C | |
| Processing (Melt) Temp | 279 to 304 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NB40 GR20 NL | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| THERMOLAST® K TC3CSN (Series: CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| HiFill® PP GF/M30 CC BK | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| Bergadur™ PB40 GK20 | PolyOne Corporation | PBT | Bergadur™ |
| ESTOPLAST XU 150BL13 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
