Order Products : sales@su-jiao.com
Evoprene™ CE 6187
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | Evoprene™ CE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FTmcwq_Evoprene-CE-6187.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The EvopreneTM CE range has been specially created to offer processors a cost engineered range of easy processing, fast cycling TPE compounds for general purpose applications. Formulated primarily for injection moulding this range is compatible for coinjection with polypropylene. The soft to mid hardness range compounds offer high levels of flexibility with good recovery properties at room temperature and excellent low temperature flexibility to -600C. The compounds are normally supplied as natural or black. Natural compound can be readily coloured with a universal masterbatch. As with all EvopreneTM TPE compounds the EvopreneTM CE range is fully recyclable at all stages through the processing chain. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 2781 |
| Molding Shrinkage | 0.50 to 1.2 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.80 | MPa | ISO 37 |
| Tensile Stress (Yield) | 5.50 | MPa | ISO 37 |
| Tensile Elongation (Break) | 510 | % | ISO 37 |
| Tear Strength 1 | 33 | kN/m | ISO 34-1 |
| Compression Set (23°C, 72 hr) | 31 | % | ISO 815 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| M-S Flow | 1.67 | MPa | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 160 to 180 | °C | |
| Middle Temperature | 160 to 180 | °C | |
| Front Temperature | 160 to 180 | °C | |
| Nozzle Temperature | 150 to 170 | °C | |
| Processing (Melt) Temp | 220 | °C | |
| Mold Temperature | 15.0 to 30.0 | °C | |
| Injection Rate | Fast | ||
| Vent Depth | 0.020 to 0.050 | mm |
| Note Message | |
|---|---|
| 1 . | Method Ba, Angle (Unnicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premier HD05553 | Premier Polymers, LLC. | HDPE | Premier |
| Radilon® S HSX88 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| Ablefilm ECF564AHF | Henkel Ablestik | Epoxy | Ablefilm |
| Cheng Yu PP227 | Cheng Yu Plastic Company Limited | PP, Unspecified | Cheng Yu |
| Diakon® Frost 952 70 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
