Order Products : sales@su-jiao.com
Diofan® A 610
| Category: | PVDC , Polyvinylidene Chloride |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Diofan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FPCyY4_Diofan-A-610.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DIOFAN®A610 is an aqueous dispersion of polyvinylidene chloride copolymer. Does not contain solvents, alkylphenol polyoxyethylene ethers or any other toxic substances. has strong water vapor barrier performance is low. DIOFAN®A610 is a latex with high surface tension. After adding convenient surfactant, high-quality coating can be obtained. After adding coalescant, it is helpful to form film at low temperature (<10 ℃). DIOFAN®A610, as a chlorine-based latex, also combines fire and flame retardant properties. End use:
The substrate can be concrete, cement, wood, gypsum, paper, and fiberboard. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| pH | 1.5 | ||
| Surface Tension | 54 | mN/m | |
| Film formation- Minimum film forming temperature | 11 | °C | |
| Solids Content | 60 | % | |
| Density | |||
| Coated film (dry) | 1.650 | g/cm³ | |
| Dispersion (wet) | 1.330 | g/cm³ | |
| Emulsion type | anion |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen transfer rate- (25°C, 85% RH, 1.0 µm) | 40 | cm³/m²/bar/24 hr | ASTM D3985 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life | 10 | month |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission Rate (38°C, 90% RH, 1.0 µm) | 14 | g/m²/24 hr | ASTM F1249 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | 16.0 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| 配送及存放 DIOFAN® A610 一般以液态或中型散装容器（ IBC） 的形式供应。液态乳胶存放于不锈钢、HDPE、硬质PVC或玻纤增强聚酯制成的贮存器。特别要避免金属，如铁、锌、铝、铜以及合金如黄铜和青铜与分散体接触。为防止蒸发干燥，应保持容器密闭。为避免降解，产品存放温度最好在10和25℃之间。 法规信息 DIOFAN ® A610生产用单体符合2011年1月14日欧盟委员会条例第10 / 2011的要求。 DIOFAN® A610 完全符合美国联邦食品、药品、化妆品法案规定及所有食品添加剂适用条例。 DIOFAN® A610生产用单体符合欧洲议会（EC ）签署的1907 / 2006法规及其理事会于2006年12月18日签署的有关的化学品注册、评估、授权和限制法规（REACH。 SolVin将根据需要提供进一步认证文件. ISO 认证： 经评估，在Tavaux生产的DIOFAN偏二氯乙烯共聚物（PVDC）的生产、内部转移及交付、设计和开发管理体系的实施，符合 ISO 9001： 2008、 ISO 14001： 2004 和OHSAS18001：007的要求。 |
| Note Message | |
|---|---|
| 1 . | Films |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AIE PET 40G8 | Asia International Enterprise (Hong Kong) Limited | PET | AIE PET |
| APEX® 07-A0550C-95 | Teknor Apex Company | PVC, Flexible | APEX® |
| Elastron® G G100.A75.B | Elastron USA, Inc. | SEBS | Elastron® G |
| Lupos® GP2300 | LG Chem Ltd. | ABS | Lupos® |
| Sylvin 8200-88 Red 648 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
