Order Products : sales@su-jiao.com
Elexar® EL-1402T
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Elexar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FNtQKq_Elexar-EL-1402T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RoHS compliant halogen free flame retardant TPE |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 87 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 10.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | ASTM D573 | ||
| 136°C, 168 hr | 0.0 | % | ASTM D573 |
| 158°C, 168 hr | 3.0 | % | ASTM D573 |
| Change in Ultimate Elongation in Air | ASTM D573 | ||
| 136°C, 168 hr | -5.0 | % | ASTM D573 |
| 158°C, 168 hr | -4.0 | % | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -52.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D2520 | ||
| 1 kHz | 3.04 | ASTM D2520 | |
| 1 MHz | 3.54 | ASTM D2520 | |
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 0.016 | ASTM D150 | |
| 1 MHz | 0.079 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm) | V-0 | UL 94 | |
| Oxygen Index | 28 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 - 177 | °C | |
| Middle Temperature | 177 - 182 | °C | |
| Front Temperature | 182 - 188 | °C | |
| Nozzle Temperature | 188 - 193 | °C | |
| Processing (Melt) Temp | 188 - 193 | °C | |
| Mold Temperature | 25.0 - 65.6 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.345 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| Drying is not necessary. However, if moisture is a problem, dry the pellets for 1 to 2 hours at 176°F (80°C). |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Cylinder Zone 1 Temp. | 171 - 177 | °C | |
| Cylinder Zone 2 Temp. | 177 - 182 | °C | |
| Cylinder Zone 3 Temp. | 182 - 188 | °C | |
| Cylinder Zone 4 Temp. | 188 - 193 | °C | |
| Cylinder Zone 5 Temp. | 188 - 193 | °C | |
| Melt Temperature | 193 - 196 | °C | |
| Die Temperature | 121 - 177 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 30 to 100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRILOY® 615 | Samyang Corporation | PC Alloy | TRILOY® |
| APEX® 85-J438-H | Teknor Apex Company | PVC, Flexible | APEX® |
| Dynacom 101-G30 | Dynachem Co. Ltd. | PBT | Dynacom |
| Polifil® Nylon 625 | The Plastics Group | Nylon 66 | Polifil® Nylon |
| Hostacom TRC 104NB | LyondellBasell Industries | TPO (POE) | Hostacom |
