Monprene® MP-1645A Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene MP-1645A is a high performance thermoplastic elastomer, available in Nat, BLK, and colors, designed for a variety of consumer and industrial product applications requiring a soft, rubber-like feel. Monprene MP-1645A is a low density, medium hardness grade exhibiting good tear strength and suitable for injection molding and extrusion.

General Information
Features	Low Specific Gravity Low density Flexibility at low temperatures Workability, good Good tear strength Good coloring Good adhesion Ozone resistance Good chemical resistance Medium hardness
Uses	Safety equipment Handle Washer Soft handle Sporting goods Rubber substitution Consumer goods application field
RoHS Compliance	RoHS compliance
Appearance	Translucent Black Available colors
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	14	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A	79	ASTM D2240
Shaw A, 5 seconds	77	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Flow			ASTM D412
50% strain	4.01	MPa	ASTM D412
100% strain	4.65	MPa	ASTM D412
200% strain	5.52	MPa	ASTM D412
300% strain	6.47	MPa	ASTM D412
Tensile Strength - Flow (Break)	12.0	MPa	ASTM D412
Tensile Elongation - Flow (Break)	680	%	ASTM D412
Tear Strength	50.9	kN/m	ASTM D624
Compression Set (23°C)	25	%	ASTM D395

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	182 - 232	°C
Middle Temperature	188 - 238	°C
Front Temperature	193 - 243	°C
Nozzle Temperature	199 - 249	°C
Processing (Melt) Temp	199 - 249	°C
Mold Temperature	35 - 49	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	182 - 232	°C
Cylinder Zone 2 Temp.	188 - 238	°C
Cylinder Zone 3 Temp.	193 - 243	°C
Cylinder Zone 4 Temp.	193 - 243	°C
Cylinder Zone 5 Temp.	199 - 249	°C
Die Temperature	199 - 249	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FMpQ79_MonpreneMP1645A.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Propafilm™ RC100	Innovia Films Ltd.	PP Alloy	Propafilm™
SABIC® LLDPE R50035EE	Saudi Basic Industries Corporation (SABIC)	LLDPE	SABIC® LLDPE
TechnoFin 4702	TechnoCompound GmbH	PP, Unspecified	TechnoFin
NEFTEKHIM PE 4318Q (18403)	Nizhnekamskneftekhim Inc.	LLDPE	NEFTEKHIM PE
Sylvin 9655-68 Clear 8384	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin