Order Products : sales@su-jiao.com
PRIMALENE WPP691M-08
| Category: | mLLDPE , Metallocene Linear Low Density Polyethylene |
| Manufacturer: | Southern Polymer, Inc. |
| Trademark: | PRIMALENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FMXfpC_PRIMALENE-WPP691M-08.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A metallocene linear low density polyethylene Applications: - Seal layer in coextrusions
Features:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.914 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | > 1.0 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD | 146 | MPa | |
| 1% Secant, TD | 165 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 10.2 | MPa | |
| TD : Yield | 9.31 | MPa | |
| MD : Break | 60.7 | MPa | |
| TD : Break | 50.3 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 500 | % | |
| TD : Break | 600 | % | |
| Dart Drop Impact | 1200 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 140 | g | |
| TD | 400 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 135 | ASTM D2457 | |
| Haze (25.4 µm) | 4.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mylar® WC (300 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Andur AL 80-5 AP/Curene® 111 | Anderson Development Company | PUR-Eth,aliphat | Andur |
| D-MEC SCR11120 | D-MEC Ltd. | Epoxy | D-MEC |
| Kingfa API-CG338 | Kingfa | PP, Unspecified | Kingfa |
| KEBAFLEX® SG 35 A.1 | BARLOG plastics GmbH | TES | KEBAFLEX® |
