Order Products : sales@su-jiao.com
VENELENE® 2706
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Poliolefinas Internacionales, C.A. (Polinter) |
| Trademark: | VENELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FMGHfO_VENELENE-2706.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features:
Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.951 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 5.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 22.0 | MPa | |
| Break | 30.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 20 | % | |
| Break | > 1500 | % | |
| Flexural Modulus | 700 | MPa | ASTM D790 |
| Flexural Strength (5.0% Strain) | 20.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact | 100 | J/cm | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 to 240 | °C | |
| Mold Temperature | < 20.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTZEX™ 10100W | Prime Polymer Co., Ltd. | LLDPE | ULTZEX™ |
| Anjacom® J255-H/GF30 | Almaak International GmbH | Nylon 6 | Anjacom® |
| Huafon HF-1265AP | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| Dryflex® SE 30A301 | ELASTO | TPE | Dryflex® |
| CERTENE™ PHM-20AN | Muehlstein | PP Homopolymer | CERTENE™ |
