Order Products : sales@su-jiao.com
Adell PC DR-16
| Category: | PC , Polycarbonate |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FIcVhD_Adell-PC-DR-16.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell PC DR-16 is a Polycarbonate (PC) material filled with 30% glass fiber. It is available in North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 4.0 to 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.17 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 92 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 145 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 8100 | MPa | ASTM D790 |
| Flexural Strength | 205 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 152 | °C | |
| 1.8 MPa, Unannealed | 145 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL6F 809-HSB | Marco Polo International, Inc. | LLDPE | MARPOL® |
| Telcar® SGI50010 | Teknor Apex Asia Pacific PTE. LTD. | TPE | Telcar® |
| Viton® A-100 | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| Toyolac® 335-X01 | Toray Resin Company | ABS | Toyolac® |
| DINALON® A1S25 C10-4152 | Grupo Repol | Nylon 6 | DINALON® |
