Order Products : sales@su-jiao.com
TRIBOCOMP® PA66 GF30 TS7
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | EPIC Polymers |
| Trademark: | TRIBOCOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FHzR3F_TRIBOCOMP-PA66-GF30-TS7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIBOCOMP® PA66 GF30 TS7 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Europe. Primary characteristic: lubricated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.47 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.40 | -- | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.4 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | ISO 527-2 | |||
| 23°C | 10000 | 7000 | MPa | |
| 90°C | 6000 | -- | MPa | |
| 120°C | 500 | -- | MPa | |
| Tensile Stress | ISO 527-2 | |||
| Yield, 23°C | 170 | 125 | MPa | |
| Yield, 90°C | 95.0 | -- | MPa | |
| Yield, 120°C | 85.0 | -- | MPa | |
| Tensile Strain (Break, 23°C) | 3.0 | 6.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 8500 | 5800 | MPa | ISO 178 |
| Flexural Stress (23°C) | 235 | 185 | MPa | ISO 178 |
| Coefficient of Friction 1 | ASTM D3702 | |||
| vs. Itself - Dynamic | 0.19 | -- | ||
| vs. Itself - Static | 0.17 | -- | ||
| Wear Factor (23°C) | 9.00 | -- | ASTM D3702 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 13 | -- | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 45 | -- | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 250 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 250 | -- | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 3.0E-5 | -- | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.28 | -- | W/m/K | ISO 22007 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | -- | ohms | ASTM D257 |
| Electric Strength | 36 | 32 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 500 | 500 | V | IEC 60112 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 270 to 300 | °C | |
| Middle Temperature | 275 to 295 | °C | |
| Front Temperature | 285 to 295 | °C | |
| Nozzle Temperature | 290 to 310 | °C | |
| Processing (Melt) Temp | < 300 | °C | |
| Mold Temperature | 80.0 to 130 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecodur® PB70 NL IM | Eurotec Engineering Plastics | PBT | Tecodur® |
| Sylvin 8200-68 Clear 876 | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| AVP™ KLL10CU | SABIC Innovative Plastics | PC | AVP™ |
| Ebalta Silicone High Solid | Ebalta Kunststoff GmbH | Silicone | Ebalta |
| Diamond GP-565 | Pak Petrochemical Industries (Pvt.) Ltd. | PS (GPPS) | Diamond |
