Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-541U
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FGgm1Z_Shin-Etsu-Elastomer-KE-541U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
KE-541U is one of a series of easy processing, general purpose grade silicone rubber bases. It can be used in a variety of applications requiring finishing by molding or extruding with extending filler.
Typical Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 42 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.896 | MPa | |
| Tensile Strength | 7.69 | MPa | |
| Tensile Elongation (Break) | 460 | % | |
| Tear Strength 1 | 13.0 | kN/m | |
| Compression Set (150°C, 22 hr) | 13 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Cure Agent | DCBP | ||
| Press / Post Cure: Post |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECOLITE KM-13N(G) | KYOCERA Chemical Corporation | Phenolic | TECOLITE |
| NOVALAC RX®873 | Vyncolit N.V. | Phenolic | NOVALAC |
| Aegis® H135QP | Honeywell | Nylon 6 | Aegis® |
| Amodel® A-1145 HS | Solvay Specialty Polymers | PPA | Amodel® |
| HiFill® PA6/6 GF33 LE | Techmer Engineered Solutions | Nylon 66 | HiFill® |
