Order Products : sales@su-jiao.com
Stirol UPM-0703 E (extra)
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | JSC CONCERN STIROL |
| Trademark: | Stirol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FGRfGT_Stirol-UPM-0703-E-extra-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPM-0703 E is for manufacturing of sheets and inside details for refrigerators with operating mode of chamber with minimal temperature -18°C. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1 | 2.5 to 4.5 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Bound Styrene | < 0.1 | % | |
| Ash Content | > 1.1 | % | |
| Purity 2 | 20.0 | ||
| Rubber Content | 20.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strain (Break) | > 40 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 8.0 | kJ/m² | ISO 179 |
| Note Message | |
|---|---|
| 1 . | ±10% |
| 2 . | Disc surface should be clean. It is allowed one insertion with diameter 0,2-0,3 mm at the surfaces of disks converting to area, cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC V868 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| RTP 200H TFE 10 SI 2 | RTP Company | Nylon 66 | RTP |
| PRIMACOR™ 3003 | The Dow Chemical Company | EAA | PRIMACOR™ |
| SCANAMID 6 B32^E F30 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| AMTOPP PL25 | Inteplast Group | PP, Unspecified | AMTOPP |
