Order Products : sales@su-jiao.com
Axiall PVC HHP-190 FR Natural
| Category: | PVC Alloy , Polyvinyl Chloride Alloy |
| Manufacturer: | Axiall Corporation |
| Trademark: | Axiall PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FFYCT3_Axiall-PVC-HHP-190-FR-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Georgia Gulf HHP-190 FR NATURAL is a special purpose profile extrusion alloy designed for applications requiring the following properties:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | ASTM D785 | |
| Durometer Hardness (Shore D) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2410 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 46.2 | MPa | ASTM D638 |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Flexural Strength | 76.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 530 | J/m | ASTM D256 |
| Tensile Impact Strength | 96.7 | kJ/m² | ASTM D1822 |
| Gardner Impact | 133 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 96.1 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 87.8 | °C | ASTM D648 |
| CLTE - Flow | 7.4E-5 | cm/cm/°C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.65 mm) | V-1 | UL 94 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 - 6.0 | hr | |
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 166 | °C | |
| Cylinder Zone 5 Temp. | 171 | °C | |
| Adapter Temperature | 177 | °C | |
| Melt Temperature | 188 - 199 | °C | |
| Die Temperature | 177 | °C |
| Extrusion instructions |
|---|
| Screen pack: 20/40 meshCompression ratio: 2.0 to 2.5 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ SY 89-21-1 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| DAULEN PPC GF 30 | Daunia Trading srl | PP Impact Copolymer | DAULEN |
| Innothane® FM-206 | Innovative Polymers, Inc. | TSU | Innothane® |
| ADENE® O05XYBG-01 | A.D. Compound S.p.A. | PP Copolymer | ADENE® |
| ULTEM™ 2310R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
