Order Products : sales@su-jiao.com
Sinvicomp SZF4869C
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FDQxn2_Sinvicomp-SZF4869C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SINVICOMP SZF4869C is a flexible polyvinyl chloride material,. This product is available in the Asia-Pacific region and is processed by extrusion. The main features of SINVICOMP SZF4869C are: ROHS certification. The typical application field of SINVICOMP SZF4869C is: wire and cable |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.47 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 15.0 | MPa | IEC 811-1-1 |
| Tensile Elongation (Break) | 250 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 168 hr 2 | IEC 60811 | ||
| Tensile strength change | 5 | % | IEC 60811 |
| Change in tensile elongation | 10 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Brittleness | -18 | °C | ASTM D746 |
| Thermal deformation- @ 120°C for 1hr | 20 | % | BS 6469 99.1 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - Oven Ageing Condition @ 100 ± 2°C for 7 days | 1.40 | mg/cm² | IEC 811-3-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 1.0E+13 | ohms·cm | BS 2782 230A |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 32 | % | ASTM D2863 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Typical temperature profile for SINVICOMP compound is from 160°C to 180°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CMixing zone: 160°C~170°CMetering zone: 170°C~180°CNozzle/Die Zone: 180°C |
| Note Message | |
|---|---|
| 1 . | @23°C |
| 2 . | @ 100 ± 2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4000 AR 10 TFE 15 | RTP Company | PPA | RTP |
| RTP 681 HEC | RTP Company | ABS | RTP |
| Sindustris ABS LMU731 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Dryflex® A3 500600 | ELASTO | SEBS | Dryflex® |
| Durethan® AKV 30 XTS1 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
