Order Products : sales@su-jiao.com
BorPure™ MB6561
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | BorPure™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F5nnbe_BorPure-MB6561.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BorPure MB6561 is a bimodal, high-density polyethylene intended for injection and compression moulding. This grade combines excellent organoleptic properties, environmental stress crack resistance and superior flow properties with good impact strength even at low temperatures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.5 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 180 | hr | ASTM D1693B |
| FNCT 1(50°C) | 13.0 | hr | ISO 16700 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 900 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 23.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 10 | % | ISO 527-2/50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 250 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C | |
| Injection Rate | Fast |
| Note Message | |
|---|---|
| 1 . | 6 MPa, Arcopal N110 2% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ShinkoLite-P MD | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| TOTAL Polypropylene PPH 9059 | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| NYLOY® MG-1020NM-1 | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| EverGlide® MB250 | Polymer Dynamix | PE, Unspecified | EverGlide® |
| KEP® 2480 | Kumho Polychem Co., Ltd. | EPDM | KEP® |
