Order Products : sales@su-jiao.com
TRIBOCOMP® PA612 CF30 TS0
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | EPIC Polymers |
| Trademark: | TRIBOCOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F4gGEB_TRIBOCOMP-PA612-CF30-TS0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIBOCOMP® PA612 CF30 TS0 is a Polyamide 612 (Nylon 612) product filled with 30% carbon fiber and 15% ptfe fiber. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.43 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.20 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.20 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 15500 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 180 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 2.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 14000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 230 | MPa | ISO 178 |
| Coefficient of Friction | ASTM D3702 | ||
| vs. Itself - Dynamic | 0.25 | ||
| vs. Itself - Static | 0.18 | ||
| Wear Factor | 14 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 10 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 45 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 210 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 195 | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 2.1E-5 | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.55 | W/m/K | ISO 22007 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 | ohms | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 220 to 250 | °C | |
| Cylinder Zone 2 Temp. | 220 to 260 | °C | |
| Cylinder Zone 3 Temp. | 225 to 270 | °C | |
| Cylinder Zone 4 Temp. | 230 to 280 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7500 GF 30 H | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| YUCLAIR® JH910 | SK Global Chemical | HDPE | YUCLAIR® |
| Abstron KU600N | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Axiall PVC 5055 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Thermec N™ 4314R15T1H | Technical Polymers, LLC | PPA | Thermec N™ |
