Order Products : sales@su-jiao.com
Aaron AVPE LD 300-1
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Aaron Industries Corp. |
| Trademark: | Aaron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F3XRER_Aaron-AVPE-LD-300-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A high flow Low Density Polyethylene Natural resin specifically designed for high speed injection molding applications. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.923 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.96 | MPa | |
| Break | 10.3 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 72.8 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WeatherPro™ Plexiglas® DR®/ABS | Spartech Plastics | ABS+Acrylic | WeatherPro™ |
| Ablebond 85-1 | Henkel Ablestik | Epoxy | Ablebond |
| NOVALAC RX®867G | Vyncolit N.V. | Phenolic | NOVALAC |
| HANWHA EVA 1316 | Hanwha Chemical | EVA | HANWHA EVA |
| Plenco 01501 (Injection) | Plastics Engineering Co. | Polyester, TS | Plenco |
