Vyncolit® E7459 Datasheet,Epoxy,Vyncolit N.V.-SHANGHAI SUSHENG

Message
Vyncolit E7459 is an epoxy; Epoxy resin material contains long glass fiber as filler. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is: resin transfer molding or compression molding. The main features of the Vyncolit E7459 are: chemical resistance low viscosity Heat resistance Typical application areas include: Electrical/electronic applications food contact applications military applications

General Information
Filler / Reinforcement	Long glass fiber
Features	The degassing effect is low to no Low viscosity Solvent resistance Anti-salt water/fog Good thermal shock resistance Good chemical resistance alkali resistance acid resistance Non-corrosive
Uses	Electrical components Military application Connector
Agency Ratings	FDA not rated USDA Unspecified Approval
Forms	Disc
Processing Method	Resin transfer molding Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.77	g/cm³	ASTM D792
Bulk Factor	7.0		ASTM D1895
Molding Shrinkage - Flow (Transfer Molded)	0.50	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	115		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	68.9	MPa	ASTM D638
Flexural Modulus	16500	MPa	ASTM D790
Flexural Strength	159	MPa	ASTM D790
Compressive Strength	172	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	210	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	250	°C	ASTM D648
Thermal Conductivity	0.60	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength ¹	15	kV/mm	ASTM D149
Dielectric Constant (1 MHz)	5.10		ASTM D150
Dissipation Factor (1 MHz)	0.010		ASTM D150
Arc Resistance	180	sec	ASTM D495

Injection instructions
Gauge: 0.3The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM F433.Water Absorption, ASTM D570, 48 hrs, 50°C: 0.2%Notched Izod Impact, ASTM D256, Method A: 3 to 5 ft/lb/inDielectric Strength, ASTM D149, 60 Hz, Method A, dry: 380 V/milDielectric Constant, ASTM D150, 1000000 Hz, dry: 5.1Dissipation Factor, ASTM D150, 1000000 Hz, dry: 0.01Bulk Factor, ASTM D1895: 6 to 8Compression and Transfer Molding Conditions: Preheat Temperature: 200 to 225 °F Mold Temperature: 270 to 330 °F Compression Mold Pressure: 1000 to 8000 psi Transfer Mold Pressure: 2500 to 8000 psi Cure Time, 0.125 in: 150 to 300 sec

Injection instructions

Gauge: 0.3The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM F433.Water Absorption, ASTM D570, 48 hrs, 50°C: 0.2%Notched Izod Impact, ASTM D256, Method A: 3 to 5 ft/lb/inDielectric Strength, ASTM D149, 60 Hz, Method A, dry: 380 V/milDielectric Constant, ASTM D150, 1000000 Hz, dry: 5.1Dissipation Factor, ASTM D150, 1000000 Hz, dry: 0.01Bulk Factor, ASTM D1895: 6 to 8Compression and Transfer Molding Conditions: Preheat Temperature: 200 to 225 °F Mold Temperature: 270 to 330 °F Compression Mold Pressure: 1000 to 8000 psi Transfer Mold Pressure: 2500 to 8000 psi Cure Time, 0.125 in: 150 to 300 sec

Note Message
1 .	Method A (short time)

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Vyncolit N.V.
Trademark:	Vyncolit®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	F2aN4Y_Vyncolit-E7459.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SLOVASTER® B1 GF 6	Plastcom	PBT	SLOVASTER®
DOW™ LDPE 525E	The Dow Chemical Company	LDPE	DOW™ LDPE
Cardia Biohybrid™ BL-F	Cardia Bioplastics™	TPS+PE	Cardia Biohybrid™
Generic PP Impact Copolymer - Talc	Generic	PP Impact Copolymer	Generic
Sumiliteresin® PR-F-116	SBHPP	Phenolic	Sumiliteresin®