Order Products : sales@su-jiao.com
TEREZ PA/ABS Blend 3610/4
| Category: | ABS+Nylon , Acrylonitrile Butadiene Styrene + Nylon |
| Manufacturer: | TER HELL PLASTIC GMBH |
| Trademark: | TEREZ PA/ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F0zMGQ_TEREZ-PA-ABS-Blend-3610-4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Impact resistant Blend with reduced moisture absorption and good flowability. For molded parts with increased demand of impact strength and cold impact strength. For injection moulding. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 30 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2300 | MPa | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 10 | kJ/m² | |
| 23°C | 30 | kJ/m² | |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 125 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | °C | ISO 75-2/A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® MD 5.0.935 | Marco Polo International, Inc. | MDPE | MARPOL® MD |
| SEETEC HDPE PH150 | LG Chem Ltd. | HDPE | SEETEC HDPE |
| SATRAN® ABS 800 R | MRC Polymers, Inc. | ABS | SATRAN® ABS |
| SUSTAPEEK MG green | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| Lion Idemitsu Composites PPS K541A3 | Lion Idemitsu Composites Co., Ltd. | PPS | Lion Idemitsu Composites PPS |
