Order Products : sales@su-jiao.com

Pro-fax PL395N

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	INDELPRO, S.A. de C.V.
Trademark:	Pro-fax
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ExonK2_ProfaxPL395N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Profax PL395N is a high cristallinity homopolymer specially designed for extrusion and thermoforming. PL395N presents very high chanical properties providing good mechanical stability to the final application. Profax PL395N is available in pellet form. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Very high cristallinity Gives mechanical stability Excellent mechanical properties Good transparency High heat deflection temperature Typical Applications: Extrusion Thermoforming

Message

Profax PL395N is a high cristallinity homopolymer specially designed for extrusion and thermoforming. PL395N presents very high chanical properties providing good mechanical stability to the final application. Profax PL395N is available in pellet form.

The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520.

Features:

Very high cristallinity

Gives mechanical stability

Excellent mechanical properties

Good transparency

High heat deflection temperature

Typical Applications:

Extrusion

Thermoforming

General Information
Additive	Clarifier
Features	High crystallization Homopolymer Definition, high
Uses	Thermoforming Applications
Agency Ratings	FDA 21 CFR 177.1520
Forms	Particle
Processing Method	Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	3.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	39.0	MPa	ASTM D638
Tensile Elongation (Yield)	6.2	%	ASTM D638
Flexural Modulus	1920	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	53	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	123	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
MARPOL® LL6F 809-HSB	Marco Polo International, Inc.	LLDPE	MARPOL®
RheTech Polypropylene G13P100-559UV	RheTech, Inc.	PP, Unspecified	RheTech Polypropylene
SEQUEL® 1440 FP BLK	LyondellBasell Industries	Polyolefin, Unspecified	SEQUEL®
CROSSVINIL EK/3 AZ	Crosspolimeri S.p.A.	PVC, Unspecified	CROSSVINIL
Fainplast PVC KL 0993	Fainplast Compounds S.r.l	PVC, Unspecified	Fainplast PVC