Order Products : sales@su-jiao.com
INEOS HDPE T60-1200-119
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Euz7Pb_INEOSHDPET601200119.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| T60-1200-119 is a narrow molecular weight distribution high density polyethylene copolymer intended for general purpose injection molding applications requiring good rigidity and a glossy surface finish. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 3.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 29.0 | MPa | ASTM D638 |
| Fracture | 11.7 | MPa | ASTM D638 |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 8.0 | % | ASTM D638 |
| Fracture | > 300 | % | ASTM D638 |
| Flexural Modulus - Tangent | 1650 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 37 | J/m | ASTM D256 |
| Notched Izod Impact | 3.50 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 26.7 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 123 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| CELEX™ 350 | Trinseo | PC | CELEX™ |
| Elastron® G G500.A60.N.PA | Elastron USA, Inc. | SEBS | Elastron® G |
| POCAN® KU 1-7301 000000 | LANXESS Corporation | PBT | POCAN® |
| POLYFLON™ M-112 | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
