Order Products : sales@su-jiao.com
EASYPOXY® K-45
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | EASYPOXY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EufQig_EASYPOXY-K-45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EASYPOXY K-45 is a 100% solids two-component paste adhesive that is mixed at a 1-to-1 ratio by weight or by volume and offers a quick set time of 4-6 minutes at room temperature. EASYPOXY K-45 is designed for bonding steel, aluminum, glass, wood, cork, fabrics, ceramics, and most hard plastics. Electrical insulation properties of EASYPOXY K-45 are good and it has good optical clarity in thin bond lines. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.16 | g/cm³ | |
| -- 2 | 1.19 | g/cm³ | |
| Molding Shrinkage - Flow | 1.0 | % | |
| Water Absorption 3(25°C, 24 hr) | 1.3 | % | |
| Solids Content | |||
| Part A - Resin | 100 | % | |
| Part B - Hardener | 100 | % | |
| Viscosity | |||
| Part A - Resin : 25°C | Light Paste | ||
| Part B - Hardener : 25°C | Light paste |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Fungal Resistance | Non-nutrient |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | |||
| -- | 20.7 | MPa | |
| -55°C 4 | 12.4 | MPa | |
| 25°C 5 | 17.4 | MPa | |
| 82°C 6 | 3.03 | MPa | |
| Flexural Strength | 53.8 | MPa | |
| Compressive Strength | 103 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.21 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity (25°C) | 2.5E+14 | ohms·cm | |
| Dielectric Constant (25°C, 1 kHz) | 4.10 | ||
| Dissipation Factor (25°C, 1 kHz) | 0.018 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life (25°C) | 4.0 to 6.0 | min | |
| Shelf Life | 78 | wk | |
| Demold Time | |||
| 25°C | 1400 | min | |
| 65°C | 60 | min |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Hardener |
| 3 . | Immersion |
| 4 . | Etched AL/AL |
| 5 . | Etched AL/AL |
| 6 . | Etched AL/AL |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4605 TFE 15 | RTP Company | SPS | RTP |
| Fluoroplex CG 25 - GMP | UNIFLON | PTFE | Fluoroplex |
| Geon™ Vinyl Flexible XV3437 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| MAJORIS CT200 | AD majoris | PP, Unspecified | MAJORIS |
| Paracril® BJLT M30 | INSA | NBR | Paracril® |
