Order Products : sales@su-jiao.com

Biograde D-2M

Category:	Biodeg Polymers , Biodegradable Polymers
Manufacturer:	Biograde Group of Companies
Trademark:	Biograde
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Epdvbh_Biograde-D-2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

A Hybrid resin for rigid moulding and extrusion applications where Biodegradability is not required.

For use in applications where the use of renewable resources are desired.

Can be used for injection moulding

BIOGRADE DM is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material.

Applications

Injection moulded products such as cutlery, toothbrushes, combs, shavers, golf-tees, etc.

Stakes and pegs

Horticultural products such as flower pots and stakes

Injection moulded caps and closures

Disposable plates and produce trays

General Information
Features	Biodegradable Good Toughness High Elongation High Strength Renewable Resource Content
Uses	Aircraft Interiors Caps Closures Disposable Tableware Lawn and Garden Equipment Personal Care Sporting Goods Support Trays Toothbrush Handles
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.08	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	7.0 to 7.5	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D883
Yield	> 13.0	MPa
Break	> 13.0	MPa
Tensile Elongation (Break)	> 200	%	ASTM D883

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	31	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	90.0	°C	ASTM D3418

Injection	Nominal Value	Unit
Suggested Max Moisture	0.20	%
Middle Temperature	170 to 180	°C
Front Temperature	150 to 160	°C
Nozzle Temperature	180 to 190	°C
Processing (Melt) Temp	160 to 165	°C
Mold Temperature	10.0 to 15.0	°C

Extrusion	Nominal Value	Unit
Suggested Max Moisture	0.20	%
Melt Temperature	160 to 165	°C

Resin Grade	Manufacturer	Category	Trademark
Moplen HP644H	LyondellBasell Industries	PP Homopolymer	Moplen
VAMPEEK A 4010	Vamp Tech	PEEK	VAMPEEK
NYLEM® 6 GFR 25	EMAS Plastik San.Tic.AS.	Nylon 6	NYLEM®
APEX® 2080-H	Teknor Apex Company	PVC, Flexible	APEX®
Generic PP Homopolymer - Glass Bead	Generic	PP Homopolymer	Generic