Category: | TPV , Thermoplastic Vulcanizate |
Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
Trademark: | Trexprene® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | EpXgGL_Trexprene-A80BWEB-HF.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Product Description: TREXPRENE ® A80BWEB-HF is a heat stabilized, weatherable thermoplastic vulcanizate containing EPDM particles dispersed in a continuous PP matrix. This high flow, black compound is formulated to bond to vulcanized EPDM rubber and is intended for injection molding applications where longer flow distances and good surface appearance is needed. Typical applications include weatherstrip corner molds and end caps. |
General Information | |
---|---|
Additive |
|
Features |
|
Uses |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.950 | g/cm³ | ISO 1183 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Shore Hardness (Shore A, 15 sec) | 82 | ISO 868 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress - Across Flow 1(100% Strain) | 4.00 | MPa | ISO 37 |
Tensile Stress - Across Flow 2(Yield) | 6.70 | MPa | ISO 37 |
Tensile Elongation - Across Flow 3(Break) | 570 | % | ISO 37 |
Tear Strength - Across Flow 4 | 32 | kN/m | ISO 34-1 |
Compression Set | |||
70°C, 22 hr | 63 | % | ASTM D395B |
70°C, 22 hr 5 | 63 | % | ISO 815 |
Note Message | |
---|---|
1 . | Type 1, 500 mm/min |
2 . | Type 1, 500 mm/min |
3 . | Type 1, 500 mm/min |
4 . | Method Ba, Angle (Unnicked), 500 mm/min |
5 . | Type A |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
NEXT REGRIND PC 143R-300RG | NEXT Specialty Resins, Inc. | PC | NEXT REGRIND |
Nycast GX | Cast Nylons Ltd. | Nylon 6 | Nycast |
ACLAR® Cx 8A | Honeywell | PCTFE | ACLAR® |
Cariflex® IR0307 K | Kraton Polymers LLC | IR | Cariflex® |
Kotex K-20UVR | Kotec Corporation | PC | Kotex |