Order Products : sales@su-jiao.com

Tecnoflon® FOR 60K

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ElIZDg_Tecnoflon-FOR-60K.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 60K is a medium-low viscosity cure incorporated fluoroelastomers copolymer. This grade is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 60K greatly reduces the reject rate due to adhesion problems. Some of the basic properties of Tecnoflon® FOR 60K are: Superior bonding to metal Very good scorch safety Superior mold flow Lack of mold fouling Excellent hot tear resistance Excellent mold release Tecnoflon® FOR 60K can be used for injection, compression, and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 60K is a medium-low viscosity cure incorporated fluoroelastomers copolymer. This grade is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 60K greatly reduces the reject rate due to adhesion problems.

Some of the basic properties of Tecnoflon® FOR 60K are:

Superior bonding to metal

Very good scorch safety

Superior mold flow

Lack of mold fouling

Excellent hot tear resistance

Excellent mold release

Tecnoflon® FOR 60K can be used for injection, compression, and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Bondability Copolymer Good Adhesion Good Mold Release Good Tear Strength High Flow Medium-low Viscosity
Uses	Adhesives Blending Bonding Gaskets Hose Metal Bonding Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	30	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Rhelon G1515-00	RheTech, Inc.	Nylon 6	Rhelon
RTP 1103	RTP Company	PET	RTP
Sinpolene MBW1988	Teknor Apex Asia Pacific PTE. LTD.	PE, Unspecified	Sinpolene
Witcom PA66 2006/274	Witcom Engineering Plastics B.V.	Nylon 66	Witcom PA66
WPP PP PPC3TF2-Black	Washington Penn Plastic Co. Inc.	PP Copolymer	WPP PP