Order Products : sales@su-jiao.com
G-Lene I60A080
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Gas Authority of India Limited |
| Trademark: | G-Lene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ehgah4_G-Lene-I60A080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 160A080 has excellent processability with optimum balance of mechanical properties and low degree of warpage. It is used for General Purpose, Multi Purpose, Vegetable Creates etc. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | < 48.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus | 804 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 88 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO MUH W7403 | Techno Polymer Co, Ltd. | ABS | TECHNO MUH |
| Wanthane® WHT-1180H | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| ELASTOSIL® M 4600 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® M |
| IDI BMC 44-10 | IDI Composites International | TS, Unspecified | IDI BMC |
| Iupilon® EHR3150 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
