Monprene® CP-10150 X (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
The Monprene CP-10100 Series of thermoplastic elastomer compounds are designed specifically for consumer product applications requiring a soft, rubber-like feel. These grades are available from 40 to 90 Shore A and are suitable for injection molding.

General Information
Features	Low density Good flexibility Good coloring General Hardness, low
Uses	Water Sports Equipment Safety equipment Handle Electrical appliances Personal care Furniture Household goods Soft touch application Soft handle Sporting goods Toys Stationery Stationery Consumer goods application field Knob Toothbrush handle
Appearance	Translucent
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.888	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	7.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 5 sec)	50		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain)	1.17	MPa	ISO 37
Tensile Stress - Across Flow (Break)	7.31	MPa	ISO 37
Tensile Elongation - Across Flow (Break)	870	%	ISO 37
Tear Strength ¹			ISO 34-1
Transverse flow	17	kN/m	ISO 34-1
Flow	27	kN/m	ISO 34-1
Compression Set ²(70°C, 22 hr)	30	%	ISO 815

Additional Information	Nominal Value	Unit	Test Method
Apparent Shear Viscosity - Capillary, @ 206/s (200°C)	222	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	160 - 177	°C
Middle Temperature	182 - 204	°C
Front Temperature	193 - 216	°C
Nozzle Temperature	182 - 227	°C
Processing (Melt) Temp	182 - 227	°C
Mold Temperature	26.7 - 48.9	°C
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 12.7	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	Method B, right-angle specimen (without cut)
2 .	Type a

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	EgENwo_Monprene-CP-10150-X-PRELIMINARY-DATA-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SEPTON™ V9475	Kuraray Co., Ltd.	SEEPS	SEPTON™
Alpha PVC GW 2052 SPEC NAT LCF	AlphaGary	PVC, Unspecified	Alpha PVC
KOCETAL® K100LO	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®
KOPA® KN333HI2	Kolon Plastics, Inc.	Nylon 66	KOPA®
Huaxia Shenzhou PVDF DS205	Shandong Huaxia Shenzhou New Material Co., Ltd.	PVDF	Huaxia Shenzhou