Stanyl® 46HF5041LW

Category: Nylon 46 , Polyamide 46
Manufacturer: DSM Engineering Plastics
Trademark: Stanyl®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: Ef3atK_Stanyl-46HF5041LW.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Stanyl® 46HF5041LW is a Polyamide 46 (Nylon 46) material filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America.

Important attributes of Stanyl® 46HF5041LW are:
  • Flame Rated
  • Flame Retardant
  • Heat Stabilizer
  • High Flow
  • Warp Resistant
General Information
Filler / Reinforcement
  • Glass Fiber, 40% Filler by Weight
Additive
  • Flame Retardant
  • Heat Stabilizer
Features
  • Flame Retardant
  • Heat Stabilized
  • High Flow
  • Low Warpage
Forms
  • Pellets
PhysicalDryConditionedUnitTest Method
Density 1.87--g/cm³ISO 1183
Molding Shrinkage ISO 294-4
     Across Flow 0.30--%
     Flow 0.70--%
Water Absorption (Equilibrium, 23°C, 50% RH)1.2--%ISO 62
MechanicalDryConditionedUnitTest Method
Tensile Modulus 1600012000MPaISO 527-2
Tensile Stress (Break)150100MPaISO 527-2
Tensile Strain (Break)1.32.0%ISO 527-2
Flexural Modulus 1400011000MPaISO 178
ImpactDryConditionedUnitTest Method
Charpy Notched Impact Strength ISO 179/1eA
     -30°C 7.07.0kJ/m²
     23°C 7.07.0kJ/m²
Charpy Unnotched Impact Strength ISO 179/1eU
     -30°C 2525kJ/m²
     23°C 2535kJ/m²
Notched Izod Impact Strength ISO 180/1A
     -40°C 1010kJ/m²
     23°C 1010kJ/m²
ThermalDryConditionedUnitTest Method
Heat Deflection Temperature (1.8 MPa, Unannealed)270--°CISO 75-2/A
Melting Temperature 1295--°CISO 11357-3
CLTE ISO 11359-2
     Flow 2.0E-5--cm/cm/°C
     Transverse 4.0E-5--cm/cm/°C
ElectricalDryConditionedUnitTest Method
Volume Resistivity > 1.0E+151.0E+10ohms·cmIEC 60093
Electric Strength 3020kV/mmIEC 60243-1
Comparative Tracking Index 300--VIEC 60112
FlammabilityDryConditionedUnitTest Method
Flammability Classification IEC 60695-11-10, -20
     0.400 mm V-0--
     1.50 mm V-0--
InjectionDryUnit
Drying Temperature 80.0°C
Drying Time 4.0 to 8.0hr
Rear Temperature 280 to 310°C
Middle Temperature 300 to 315°C
Front Temperature 300 to 315°C
Nozzle Temperature 300 to 310°C
Processing (Melt) Temp 310 to 320°C
Mold Temperature 60.0 to 120°C
Injection Rate Moderate-Fast
Back Pressure 1.00MPa
Screw Compression Ratio 2.5:1.0
Note Message
1 .10°C/min
Resin Grade Manufacturer Category Trademark
RAMLLOY PBB701 Polyram Ram-On Industries PC+ABS RAMLLOY
Sylvin 9266-85 BLACK Sylvin Technologies Incorporated PVC, Unspecified Sylvin
Ferro PP LPP30BV02NA Ferro Corporation PP, Unspecified Ferro PP
Indothene LL LL 36RA045 UV Reliance Industries Limited LLDPE Indothene LL
INSTRUC PEIGF10 Infinity LTL Engineered Compounds PEI INSTRUC