Order Products : sales@su-jiao.com
Plasmer 1380B/8901
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HYUNDAI EP Co., Ltd. |
| Trademark: | Plasmer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EcpVXU_Plasmer-1380B-8901.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Wide service temperature range, resistance, compression set, recyclable |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/7.06 kg) | 6.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 4.02 | MPa | ASTM D412 |
| Tensile Strength (Break) | 39.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® B3 GF 30 2 grey (3204) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Edgetek™ ET9700-5012 NHFR Natural | PolyOne Corporation | PPA | Edgetek™ |
| Generic SEPS | Generic | SEPS | Generic |
| EnCom GF10 PC | EnCom, Inc. | PC | EnCom |
| POLYFORT® FPP 22 T K1093 | A. Schulman Europe | PP Homopolymer | POLYFORT® |
