Order Products : sales@su-jiao.com

ESENTTIA 35H35

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Eayxmg_ESENTTIA-35H35.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant.

Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

General Information
Additive	Unspecified Additive
Features	Clean/High Purity Controlled Rheology Food Contact Acceptable Gas-fading Resistant General Purpose High Flow Homopolymer Narrow Molecular Weight Distribution
Uses	Fabrics Fibers General Purpose Spunbond Nonwovens
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Extrusion Coating Fiber (Spinning) Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	35	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	34.5	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	9.8	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1480	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	32	J/m	ASTM D256A

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
SOFTAPLAS S 75A	Ovation Polymers Inc.	TPE	SOFTAPLAS
Sylvin 6202-70 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Varcum 92600	Durez Corporation	Phenolic	Varcum
ICORENE® 9909	ICO Polymers EMEA, A Division of A. Schulman	PC	ICORENE®
PLEXIGLAS® Sheet Resist Clear OF01/OR01	Evonik Industries AG	Acrylic (PMMA)	PLEXIGLAS® Sheet