Order Products : sales@su-jiao.com
TechnoFin 4702
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoFin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EaAUkw_TechnoFin-4702.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TechnoFin compounds with variable flow behaviour, good workability, possess good damping characteristics, high rigidity and very good abrasion behaviour. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) | 2.00 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1500 | MPa | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 18 | kJ/m² | ISO 179/1eA |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+3 | ohms·cm | IEC 60093 |
| Additional Information |
|---|
| Charpy Notched Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A: >18 kJ/m²Volume Resistivity, IEC 60093: <1e3 ohm-cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Veroplas 660 | PlastxWorld Inc. | ABS | Veroplas |
| BMC 102 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| ASI POLYETHYLENE CP 763-01 Natural | A. Schulman Inc. | LDPE | ASI POLYETHYLENE |
| Daelim Po1y® LD-05A | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| Sylvin 8200-85 Grey 9574 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
