Order Products : sales@su-jiao.com
Kazan LDPE 16813-070 OKP 22 111 4102
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EZgIwZ_Kazan-LDPE-16813-070-OKP-22-111-4102.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.917 to 0.920 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | |
| Extractables 1 | < 0.6 | % | |
| Melt Flow - Dispersin within a batch 2 | < 10 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 8.00 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 105 | MPa | |
| Break | > 105 | MPa | |
| Tensile Strain (Break) | > 450 | % |
| Note Message | |
|---|---|
| 1 . | Premium grade, Grade I, II |
| 2 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E665MZAA | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| SOLARENE S834 | Dongbu Hannong Chemical | PS (GPPS) | SOLARENE |
| TRAMID® 4110G60 | Samyang Corporation | Nylon, Unspecified | TRAMID® |
| Varcum 29324 | Durez Corporation | Phenolic | Varcum |
| Mylar® EB-11 (300 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
