TECHNYL® C 218 V45 BLACK Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® C 218 V45 Black is a polyamide 6, reinforced with 45% of glass fiber, heat stabilized, for injection moulding. This grade offers high mechanical strength, good surface aspect, for injection moulding.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 45% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Good dimensional stability Rigidity, high Good demoulding performance
Uses	Power/other tools Application in Automobile Field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA6-GF45

Physical	Dry	Conditioned	Unit	Test Method
Density	1.51	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	0.80	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	14400	9900	MPa	ISO 527-2/1A
Tensile Strength
Fracture, 23°C	190	--	MPa	ASTM D638
Fracture, 23°C	220	130	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	3.0	6.5	%	ISO 527-2
Flexural Modulus (23°C)	12000	--	MPa	ASTM D790
Flexural Strength (23°C)	310	--	MPa	ASTM D790

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	16	24	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	90	--	kJ/m²	ISO 179/1eU
Notched Izod Impact (23°C)	190	--	J/m	ASTM D256

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	210	--	°C	ISO 75-2/Af
Melting Temperature	222	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Comparative Tracking Index (Solution A)	475	--	V	IEC 60112

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	235 - 240	°C
Middle Temperature	240 - 250	°C
Front Temperature	250 - 260	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	EVB9fH_TECHNYLC218V45BLACK.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
VESTAKEEP® 1000P	Evonik Industries AG	PEEK	VESTAKEEP®
DynaChar™ C2260F	Polymer Dynamix	Nylon 12	DynaChar™
LNP™ THERMOCOMP™ 9X07430 compound	SABIC Innovative Plastics	PC+PBT	LNP™ THERMOCOMP™
Lupoy® ER5001RFA	LG Chem Ltd.	PC+ABS	Lupoy®
SQUARE® LSR6030-30A/B	Shenzhen SQUARE Silicone Co., Ltd.	Silicone Rubber, LSR	SQUARE®