Order Products : sales@su-jiao.com
ISPLEN® PP 020 G3E
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ESgFYm_ISPLEN-PP-020-G3E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISPLEN® PP 020 G3E is a low melt flow rate polypropylene homopolymer with a reinforced formulation of thermal stabilization suitable for protecting the polymer during extrusion process and final use. His crystalline structure gives a good balance between stiffness and tensile strength resistance. TYPICAL APPLICATIONS
Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.91 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 34.0 | MPa | ISO 527-2 |
| Flexural Modulus | 1200 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 90.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 151 | °C | ISO 306/A |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 to 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan XCW-9210 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| UTEC 5041 | Braskem America Inc. | UHMWPE | UTEC |
| EMERGE™ PC 8230-15 | Trinseo | PC | EMERGE™ |
| Okirol® E-6 | DIOKI d.d. | PS (EPS) | Okirol® |
| LNP™ STAT-KON™ EE005E compound | SABIC Innovative Plastics | PEI | LNP™ STAT-KON™ |
